Hasting
Loop Impedance Meter MZC-305
Earth Resistance Meter MRU-20
Thermal Imagers KT-160/160A
HD Thermal Resolution KT-384
Earth Resistance Meter MRU-200
Wireless Inspection Camera
Insulation Resistance Meter MIC-5000
Portable Appliance Tester PAT-805
Micro Ohm Meter MMR-620/630
POWER QUALITY ANALYZER PQM-701
Digital Clamp-On Multimeter CMP-1006
WIRE TRACER LKZ-700
WIRE TRACER LKZ-710
Data Logging Light Meter LXP-1
Ohmstik Plus
Ampstik Plus
Radio Voltstik
EK 60 UNV-L
EK 60/22-L
EK 35/4 L & ES 20
Taekwang
PITE 3915 Battery Tester
FTU P100 PNC
LBS Pole PNC
SAG Mini gateway
PAC-E500 Under Frequency Relay

 

SONEL

Thermal Imagers , KT-160/160A

Thermal imager, Sonel KT-160 , is fully radiometric device – it registers temperature of image’s each point (without approximation). Used Infra Fusion technology allows to observe and register thermal images, real images or combination of both, which helps to locate measurement place. User can choose one of 8 color palettes for the best temperature projection. The image of resolution 160x120 is displayed on large 3,6-inch LCD screen. ... more detail

Earth Resistance Meter , MRU-200

The MRU-200 is a new earth resistance meter, designed and manufactured by Sonel, a Polish company. It is a highly functional instrument, suitable for users who have to make repeated measurements under various and often difficult field conditions. The meter provides an exceptional range of functions, including comprehensive methods for taking static earth resistance measurements (3 and 4-wire measurements; two types of clamp measurements), as well as a unique method of surge resistance measurement.... more detail

Earth Resistance Meter , MRU-20

The MRU-200 is a new earth resistance meter, designed and manufactured by Sonel,Possible measurements:

  • earth resistance measurment with 3-pole method,
  • measurement of continuity of equipotential bondings and protective conductors with auto-zero function - with current 200mA,
  • resistance measurement using 2-pole method.
  • .... more detail

    Current Clamp-On meter with Wireless Data Transmission , CMP 600

    Current Clamp-On meter with Wireless Data Transmission , CMP 600
    - safe, insulated measuring clamps (30mm or a 35x10mm rack),
    - automatic range selection switchable to the manual range selection mode
    - “HOLD" function for holding measured values on the LCD,
    - legible LCD,
    - “DC ZERO" function – DC of the instrument can be zeroed, and the absolute measurement mode can be restored, at any time,
    - relative measurement mode for AC,
    - storage of minimum and maximum values,
    - estimates of electric energy costs made by the program provided.... more detail

    Digital Clamp-On Multimeter , CMP-1006

    The CMP-1006 meter is a modern, high-quality measuring device, which is easy and safe to use.

  • AC/DC current measurement (TRUE RMS) up to 1000A.
  • Measurement of INRUSH current in start-up phase of electrical device (high frequency of sampling)
  • AC/DC voltage measurement (TRUE RMS) up to 600V.
  • Resistance measurement and continuity test:
    - continuity test with acoustic signalling (beeper) for resistance below 40
  • .... more detail

    Insulation Resistance Meter, MIC-5000

    Digital insulation resistance meter MIC-5000 is intended for direct measurements of insulation resistance in power cables, transformers, electric motors and other power devices and equipment. Additionally, the device enables measurement of DC and AC voltages as well as low voltage measurement of low resistances. All test terminals of the instrument are fitted with a circuitry protecting the device from damage should the mains voltage appear on the input. The instrument was designed and built in compliance with EN IEC 61557 standard ... more detail

    Wire Tracer , LKZ-700

    Wire tracer LKZ-700 is designed for detecting of cables and conductors in various environments (concrete, brick, wood, ground) being under voltege, without the need to disconnect any devices from tested network, as well as in non-voltage environments. The range of instrument application is very wide and the most common applications are as follows:
    - detection of conductors in ceilings, walls and floors, - location of breaks in cables,
    - location of switches and fuses,
    - location of the routes of shorted circuits,
    - location of earth cables failure in installation
    - possibility to detect illegal power consumption,
    - tracing of underground cables course, to the depth of 2 m .... more detail

    Wireless Inspection Camera , BKI-1

    Designed to enable easy controlling of hard accessible places. Light and handy camera is made for finding, diagnosing and solving problems, thanks to elastic ending with camera, remote display and useful accessories ... more detail

    Power Quality Analyzer , PQM-701/701Z

    The problems caused by poor power quality are extremely serious and can make life very difficult for electrical energy consumers, often even causing substantial financial losses for them. The most important power quality issues include:

    • higher harmonics in the mains system,
    • voltage dips and interruptions,
    • short events but with very high amplitudes, voltage swells,
    • flicker,
    • unbalance.

    The PQM-701 with the software is an exceptionally useful power quality analyzer which can be used in all areas of power engineering, both in professional power engineering and at industrial plants ... more detail

    Data Logging Light Meter , LXP-1

    The digital light meter is a precision instrument used to measure illuminance (Lux, footcandle) in the field. It is meet CIE photopic spectral response. It is fully cosine corrected for the angular incidence of light. The illuminance meter is compact, tough and easy to handle owing to its construction. The light sensitive component used in the meter is a very stable, long-life silicon photo diode and spectral response filter ... more detail

     SELAMAT DATANG DI WEBSITE AURASINARINDO ABADI